21:18:35.357 ACP                       Initializing AcquireSupport V7.0.2
Weather safe, server OK
User actions detected.
Telescope is ACP->POTH->Astrooptik, driver V2
Dome is POTH->Gornergrat Dome Driver
MaxIm DL/CCD is version 5.23
Imager is FLI
Imager readout modes:
  0 is 8 MHz
  1 is 8 MHz (RBI Flood)
  2 is 1 MHz
  3 is 1 MHz (RBI Flood)
Autoguiding is disabled
Calculated unbinned plate scales (arcsec/pix): H = 1.47 V = 1.47
Calculated field of view (arcmin): H = 100.4 V = 100.4
This is AcquireImages V6.0.9
Hardware pier side reporting is available.
This mount can be flipped on command.
Compiling plan...
(using ACP Plan Compiler V7.0.1)
...plan OK!
This plan has 1 live target(s), 1 images
There are 1.0 min. of actual imaging time
Image file set-numbers start with 1
Automatic pointing updates are disabled
Final exposures:
  (plate solving is disabled)
Starting run for plan currentPlan.txt...
==== Starting target Pecker ====
; ------------------------------------------------------
; This plan was generated for the Gornergrat Observatory
; ------------------------------------------------------
;
; For:           Stellarium Gornergrat
; Targets:       1
;
; ---------------------------------------------
;
;
; === Target Pecker ===
SR - Pre slew telescope
  Start slew to Pre-slew...
  (wait for slew to complete)
  (slew complete)
SR - Pre slew dome
SR - Dome is slaved ? true
  (wait for slew to complete)
  (slew complete)
  (wait until Tue, 17 May 2016 21:15:00 UTC)
  (wait finished)
  (no slew, scope already within max error of target)
  Ready for Pecker (# 1 of 1 in set 1)
  Do requested auto-focus...
    [flip check:  Tn=420s HAc=-1952s GW=F HAz=-1529s DWz=F WF=no]
  (offset to east to avoid flip)
  Search 15 deg-square area for suitable target stars
  Looking for stars between mags 6 and 9
  Found mag 6.0 star, GSC 0328-2029; nothing within 56 arcsec.
  Star J2000 coordinates RA=14:30:45 Dec=04[B0] 46' 22"
  Using star at mag 6.0. Slew to star.
  Start slew to AutoFocus...
  (wait for slew to complete)
  (slew complete)
  Switching from Green to Clear filter for auto-focus
  (AF will use 8 MHz readout mode)
  Starting Autofocus...
**AutoFocus failed. Check FocusMax log for details.
  Slewing back to original position...
  Start slew to AF return...
  (wait for slew to complete)
  (slew complete)
  Autofocus finished.
  (oops, MaxIm filter changed! Fixing...)
  (no slew, scope already within max error of target)
    [flip check:  Tn=240s HAc=-1813s GW=F HAz=-1570s DWz=F WF=no]
  === Place in plan ===
      Set 1 of 1
      Target is "Pecker" (1 of 1)
        Repeat 1 of 1 for this target
          Filter Clear (1 of 1)
            Image 1 of 1 for this filter
  Imaging to Pecker-S001-R001-C001-Clear
  (taking 60 sec. exposure, Clear filter, binning = 1)
  (using 8 MHz readout mode)
  (starting exposure)
  (exposure complete and image downloaded)
  Image finished
  (turning tracking off for safety)
End of run.