23:23:23.129 ACP                       Initializing AcquireSupport V7.0.2
Weather safe, server OK
User actions detected.
Telescope is ACP->POTH->Astrooptik, driver V2
Dome is POTH->Gornergrat Dome Driver
MaxIm DL/CCD is version 5.23
Imager is FLI
Imager readout modes:
  0 is 8 MHz
  1 is 8 MHz (RBI Flood)
  2 is 1 MHz
  3 is 1 MHz (RBI Flood)
Autoguiding is disabled
Calculated unbinned plate scales (arcsec/pix): H = 1.47 V = 1.47
Calculated field of view (arcmin): H = 100.4 V = 100.4
This is AcquireImages V6.0.9
Hardware pier side reporting is available.
This mount can be flipped on command.
Compiling plan...
(using ACP Plan Compiler V7.0.1)
...plan OK!
This plan has 1 live target(s), 1 images
There are 1.0 min. of actual imaging time
Image file set-numbers start with 1
Automatic pointing updates are disabled
Final exposures:
  (plate solving is disabled)
Starting run for plan currentPlan.txt...
==== Starting target Pecker ====
; ------------------------------------------------------
; This plan was generated for the Gornergrat Observatory
; ------------------------------------------------------
;
; For:           Stellarium Gornergrat
; Targets:       1
;
; ---------------------------------------------
;
;
; === Target Pecker ===
SR - Pre slew telescope
  Start slew to Pre-slew...
  (wait for slew to complete)
  (slew complete)
SR - Pre slew dome
SR - Dome is slaved ? true
  (wait for slew to complete)
  (slew complete)
  (wait until Tue, 17 May 2016 23:15:00 UTC)
  (wait finished)
  (no slew, scope already within max error of target)
  Ready for Pecker (# 1 of 1 in set 1)
  Do requested auto-focus...
    [flip check:  Tn=420s HAc=5267s GW=F HAz=5690s DWz=F WF=no]
  (offset to east to avoid flip)
  Search 15 deg-square area for suitable target stars
  Looking for stars between mags 6 and 9
  Found mag 6.0 star, GSC 0379-1509; nothing within 658 arcsec.
  Star J2000 coordinates RA=16:09:11 Dec=06[B0] 22' 44"
  Using star at mag 6.0. Slew to star.
  Start slew to AutoFocus...
  (wait for slew to complete)
  (slew complete)
  (AF will use 8 MHz readout mode)
  Starting Autofocus...
  FocusMax auto-focus successful!
    HFD = 4.10
    Focus position = 37279
  Slewing back to original position...
  Start slew to AF return...
  (wait for slew to complete)
  (slew complete)
  Autofocus finished.
  (no slew, scope already within max error of target)
    [flip check:  Tn=240s HAc=5696s GW=F HAz=5939s DWz=F WF=no]
  === Place in plan ===
      Set 1 of 1
      Target is "Pecker" (1 of 1)
        Repeat 1 of 1 for this target
          Filter Clear (1 of 1)
            Image 1 of 1 for this filter
  Imaging to Pecker-S001-R001-C001-Clear
  (taking 60 sec. exposure, Clear filter, binning = 1)
  (using 8 MHz readout mode)
  (starting exposure)
  (exposure complete and image downloaded)
  Image finished
  (turning tracking off for safety)
End of run.