20:30:06.957 ACP                       Initializing AcquireSupport V7.0.2
Weather safe, server OK
User actions detected.
Telescope is ACP->POTH->Astrooptik, driver V2
Dome is POTH->Gornergrat Dome Driver
MaxIm DL/CCD is version 5.23
Imager is FLI
Imager readout modes:
  0 is 8 MHz
  1 is 8 MHz (RBI Flood)
  2 is 1 MHz
  3 is 1 MHz (RBI Flood)
Autoguiding is disabled
Calculated unbinned plate scales (arcsec/pix): H = 1.47 V = 1.47
Calculated field of view (arcmin): H = 100.4 V = 100.4
This is AcquireImages V6.0.9
Hardware pier side reporting is available.
This mount can be flipped on command.
Compiling plan...
(using ACP Plan Compiler V7.0.1)
...plan OK!
This plan has 1 live target(s), 5 images
There are 0.0 min. of actual imaging time
Image file set-numbers start with 1
Automatic pointing updates are disabled
Final exposures:
  (plate solving is disabled)
Starting run for plan currentPlan.txt...
==== Starting target Jupiter ====
; ------------------------------------------------------
; This plan was generated for the Gornergrat Observatory
; ------------------------------------------------------
;
; For:           Stellarium Gornergrat
; Targets:       1
;
; ---------------------------------------------
;
;
; === Target Jupiter ===
SR - Pre slew telescope
  Start slew to Pre-slew...
  (wait for slew to complete)
  (slew complete)
SR - Pre slew dome
SR - Dome is slaved ? true
  (wait for slew to complete)
  (slew complete)
  (wait until Sun, 3 Jul 2016 20:30:00 UTC)
  (wait finished)
**(current) Jupiter skipped: The slew coordinates are below the minimum elevation limit.
  (turning tracking off for safety)
End of run.

20:30:06.958 MainController            List of detected errors
20:30:06.959 MainController            PLANEXECUTION_Problem